电工优优今天要和大家分享的2500w激光打印机相位控制,2500W Phase Con相关信息，接下来我将从2500w激光可以割多厚这几个方面来介绍。
打印机相关技术文章2500w激光打印机相位控制,2500W Phase Con
2500w激光打印机相位控制,2500W Phase Control
This circuit controls resistive and inductive loads up to 2,500W. Its main functional device is an integrated phase control circuit - Siemens TLE3103. It contains its own power supply, a zero voltage crossing detector circuit and a logic driver. An additional feature is the low voltage input to enable/disable triac firing enabling/disabling the logic driver. The function is as follows: pin13 TLE3103 open (floating), trigger output active, tied to ground trigger output disabled.
Description
--------------------------------------------------------------------------------
An UP and a DOWN pushbutton control a 32-step digital potentiometer (IC2, AD5228) via the debouncer IC1 (MAX6817). The digital potentiometer has a power on reset pin which might be tied to ground causing the potentiometer to start at midscale, or to VCC causing it to start at zero scale. The desired function is selectable using jumper JP1. The triac (capable of driving 40A loads) is a bit overkill for the desired power but the BTA41 has an isolated body and therefore handling of the board under voltage is less dangerous as it is with phase on the package. The snubber circuit uses a 68μH inductance but this might be replaced with a 100 resistor. When replacing the inductance C5 should have a value of 47nF.
Board: Purely single sided, measurements: 3.54X2.15 inches (87.63X54.61mm)
Remark: The debouncer circuit is manufactured with a SOT23-6 package. It might be soldered directly onto the board (DIP-6 package) using thin wires or an adapter board.
Circuit designed by:Hans-Juergen Zons102 Moo 9 LampasakT. Dong Mon LekMueang, PhetchabunPhetchabun67000 Thailand
Parts List
Part Value PackageC1 100n C-5C2 100n C-5C3 100/16 ELC3,81C4 22n C-5C5 10n/250VAC C-15D1 1N4005 DO41-10IC1 MAX6817 AD-SOT23IC2 AD5228 DIL08IC3 TLE3103 DIL-14J1 TE-03 TERMINAL 5.08J2 TE-03 TERMINAL 5.08J3 TE-03 TERMINAL 5.08L1 68H/3A DS30AQ1 BTA41-600 TOP3R1 120R R-10R2 18K/2W R-18R3 820K R-10R4 180K R-10R5 56K R-10S1 UP BUTTON-02S2 DOWN BUTTON-02
PCB
关于打印机就介绍完了，您有什么想法可以联系小编。
以上就是"电工优优"为大家介绍的2500w激光可以割多厚的相关信息，想了解更多"2500w激光打印机相位控制,2500W Phase Con,2500w激光可以割多厚"相关知识，请收藏电工无忧吧。